Pages

▼

Saturday, July 30, 2022

Definitions and basic terms used in titration

Titration is also known as titrimetry or volumetric analysis. It is the method by which a solution is added to another solution under conditions where the added volume can be reliably determined. In quantitative analytical chemistry, it is used to measure the unknown concentration of an analyte.

Titrations are often associated with acid-base reactions, although they can also involve other types of reactions such as precipitation, redox, and complexometric titrations. An indicator is usually used to signal the completion of the reaction.

What is the definition of titration?

A titration is defined as “A technique/process for determining the concentration of an analyte using the least amount of known concentration reagent needed to produce a specific effect when reacted with a known volume of the test solution”.


What are the terms used in titration?

Burette:

A graduated glass tube having a tap at one end is used for titration to administer known volumes of liquid. It is used to accurately dispense small amounts of liquid with accuracy.

Conical or Erlenmeyer flask:

A conical flask is a particular type of laboratory flask that has a cylindrical neck, a conical body, and a flat bottom. In chemistry laboratories, conical flasks are often used to hold liquids and mix them by swirling.

Titrant:

A solution with a known concentration is filled in the burette that is added to another solution to find out the concentration of a second chemical species.

Titrand:

A titrand is a solution whose concentration is determined through titration. It is possible to calculate the analyte concentration by reacting the analyte with a titrant of known concentration and volume.

Analyte/Titrate:

A substance whose quantity or concentration is to be determined, preparing the analyte involves dissolving the substance being studied into a solution.

Indicator:

The indicator is a substance that changes color when introduced to acidic or alkaline solutions. The color indicators are used to determine the pH, and they can also be added to the reaction mixture to find out where the endpoint or equivalence point is for the different types of titration.

Phenolphthalein, methyl orange, erichrome black T, methylene blue, potassium permanganate, potassium chromate, dichlorofluorescein, ferric ion, etc. are a few examples of indicators.

Standardization:

Standardization is a process in titration used to determine the precise concentration (molarity or normality) of a prepared solution using a primary or a secondary standard solution. As a reference to the standardization process, a standard solution is essential.

Standard solution:

A standard solution is a solution whose concentration of a substance is accurately known. A known quantity of solute is dissolved to produce a particular volume. It is prepared with a standard substance (primary standard).

Primary standard:

A primary standard is an extremely pure compound used as reference material in titrations, quantitative analyses, and other analytical chemistry techniques. It is representative of the substance's molecular weight and is easily weighed.

Primary standards are commonly used to prepare standard solutions. It has a high level of purity, is non-hygroscopic, has a high equivalent weight, low reactivity, and is non-toxic.

Secondary standard:

A substance whose active agent content has been identified by comparison with the primary standard is called a secondary standard. It is often standardized against a primary standard.

Analytical instruments and procedures are calibrated using secondary standard solutions. Analytical equipment and analytical methods are calibrated using secondary standard solutions.

Equivalence point or stoichiometric point:

The equivalence point or stoichiometric point is the precise point in a titration at which the moles of one titrant equals the moles of the substance being measured. It is a point in a titration at which the reaction between the titrated substance and the titrant (standard) is completed.

Endpoint:

The endpoint is when the number of moles of the reacting titrant is more than the number of moles of the substance being tested. This is the point in the titration process where the indicator changes its color.

Buffer:

A solution consisting of an acid and its conjugate base is used to control the pH of a solution. It can neutralize small amounts of added acid or base, thus maintaining the pH of the solution relatively stable. In EDTA titration, a buffer solution is used as it is resistant to changes in pH that occur during the process.

pH:

pH stands for potential of hydrogen, a measure of the hydrogen ion concentration is equal to - log [H+]. The pH scale is usually from 0 to 14 in its range, The substances having a pH value of less than 7 that considered acidic, and basic or alkaline substances have a pH value of greater than 7, while 07 is considered a neutral pH.

pKa value:

The pKa value describes the acidity of a certain molecule. The strength of an acid is determined by how tightly a proton is retained by a Bronsted acid. When the pKa value is low, the stronger the acid and has a greater ability to donate its protons.

Titration curve:

A titration curve is the plot of the pH of the analyte solution against the amount of titrant added as the titration proceeds. The pH curves also help in determining the strength of the acid/base for determining the equivalence point. Additionally, it is possible to determine the concentration of the analyte.

Normality:

Normality can be defined as the number of grams or mole equivalents of a solute that are present in one liter of a solution. When we talk about an equivalent, we are referring to the number of moles of reactive in a compound. It is the number of grams of solute dissolved in one liter (1000 ml) of the solution, which is indicated by N.

Molarity:

The term "molarity" refers to the number of moles of solute dissolved in one liter (1000 ml) of solution. Molarity is indicated by M and it is also known as the molar concentration of a solution.

Assay:

A technique of analyzing a substance to ascertain its composition or quality is called an assay. An assay is a test that determines what compounds a substance contains. It is commonly used to determine the purity of a substance.


References:
No comments:

Thursday, July 28, 2022

What is the process of titration?

A titration is a method used in chemistry to determine the concentration of a reactant in a solution that is unknown. In the process, a known solution is added to an unknown solution until a reaction occurs. Typically, this reaction involves a color change.

A titration will produce very accurate results for different types of titrations, such as acid-base, redox complexation, and precipitation reactions when it is performed correctly and carefully.


What is titration in chemistry?

A titration is defined as “ it is a process of determining the concentration of a sample (analyte) by adding known increments of substance (titrant) with which it reacts until precise chemical equivalence is achieved (the equivalence point)”.

Titration is an analytical method that allows us to determine the concentration of an unknown analyte by adding a titrant solution with a known concentration. The analyte and titrant react according to a known stoichiometric relationship, such that the reaction will consume all analytes at some point during the addition of the titrant.

Therefore, the volume and molar stoichiometry of the titrant were added to allow the determination of the unknown concentration. There are a variety of indicators that can be used to determine the endpoint of the titration. The selection of the indicator is dependent on the indicator's acid strength.

Preparation of 0.1n sodium hydroxide (NaOH) and its standardization with standard hydrochloric acid (HCl) solution is one example of acid-base titration.

Procedure of titration:

In the titration process, a titrant is prepared, which is a standard solution whose volume and concentration are predetermined. Then, the titrant is mixed with the analyte until a certain endpoint or equivalence point is reached.

At this stage, the amount of titrant consumed can be used to calculate the concentration of the analyte. Alternatively, titration is a concept of stoichiometry used to determine the concentration of a solution whose value is unknown.
process of titration

In terms of steps of the procedure, the accurate quantity of analyte is taken in the conical flask. A few drops of the indicator are then placed underneath the calibrated burette that holds the titrant. The titrant is added dropwise into the analyte and the indicator in small volumes.

This will continue until the indicator reacts to the titrant saturation threshold and changes color. At this point, this would indicate that comes to the endpoint of the titration. In this situation, the quantity of titrant balances the amount of analyte present throughout the reaction.

Steps involved in titration:

  • Before beginning, gather all the required apparatus such as conical flask, burette, burette, stand, pipette, beaker, volumetric flask, funnel, etc.
  • Glassware should all be washed, rinsed, and properly dried according to standard laboratory procedures.
  • Before filling the burette for the titration, rinse it with distilled water and then pre-rinse it with a portion of the titrant solution. Pre-rinsing is required to make sure that all solution in the burette is the desired solution, not a contaminated or diluted solution.
  • Fill the burette with an excess amount of prepared titrant.
  • Carefully clamp the burette to a burette-stand.
  • Remove the air bubbles by tapping the burette or by draining some volume of titrant and adjusting it to zero reading.
  • Measure precisely the amount of analyte to be used and pour it into a flask.
  • Then add a few drops of indicator as per the procedure into the flask.
  • If required, add a second chemical.
  • Put the flask in place beneath the burette.
  • Slowly rotate the stopcock to the open position to allow the titrant drips out of the burette.
  • Once the reaction is completed (Equivalence/endpoint is reached), properly record the burette reading.
  • It is recommended that to get accurate results, repeat the titration three times.
  • Dispose of used chemicals in a clearly labeled waste container.
  • Effectively clean glassware by rinsing it with water after use.
  • Take their mean and calculate the molarity/normality/concentration of the sample.


People also ask:

Describe the process of titration
Explain the process of titration
How do you do titration problems step by step?
How do you prepare for a titration?
How does the process of titration work?
How is a titration experiment performed?
How is the process of titration carried out?
Standard operating procedure for titration (SOP)
Titration lab procedure
What happens during titrations?
What is the experimental procedure for titration?
What is the titration process?
What is titration and how is it performed?
Which is the first step in the titration process?
No comments:

Wednesday, July 27, 2022

Importance of titration in chemistry

Some advanced methods in chemistry make our daily lives easier. Particularly, analytical chemistry is the branch of chemical sciences that focuses generally on two components: qualitative analysis and quantitative analysis.
  • Qualitative analysis: Identifies the chemical species present in the sample.
  • Quantitative analysis: The amount of absolute or relative abundance of one, many, or all of the specific substances present in a sample.
Titration, also referred to as titrimetry, is a method of quantitative analysis that ability to determine the concentration of particular substances present in a sample. Since the most important thing to measure in this analysis is volume, titration is also called volumetric analysis.

Using a burette, titrant (known solution) is typically slowly added to a known volume of analyte (unknown solution) until the reaction reaches neutralization. The concentration of the unknown can be determined by knowing the amount of titrant added. An indicator is often used to indicate the endpoint of the reaction.

Based on the types of reactions involved titrations can be classified as acid-base titration, redox titration, precipitation titration, and complexometric titration. They have a variety of medical, industrial, and commercial uses.

Why is titration important in chemistry?

The main goal of titration is to determine the concentration of a solution (Analyte) by reacting with another solution whose concentration is already known (titrant). With titrations, we can find the equivalence point; it is a point where equal amounts of reactants have been mixed.

Titration is a method of quantitative volumetric analysis that is used to determine the exact concentration of solutions by estimating their molarity or normality while titrating them with a solution of known concentration. It is more commonly used in pharmaceutical analysis, food industry, medical diagnosis, cosmetic industry, wine industry, wastewater management, etc.



People also ask:

Why is titration important in chemistry?
Importance of acid base titration
Importance of back titration
3 importance of titration
What is the importance of a standard solution in titration?
Why is titration important
Significance of titration
Why is titration important in real life?
Why is titration important in a laboratory?
What is the importance of titration in analytical chemistry?


You may also like this:

What is the process of titration?
Definitions and basic terms used in titration
Why is titration known as volumetric analysis?
Volumetric Analysis: Principle, Types, Procedure & Applications
Sources of error in titration
What solution usually goes in the burette in titration?
Preparation and standardization of oxalic acid using sodium hydroxide
Standardization of NaOH with oxalic acid
Standardization of NaOH with KHP
Standardization of HCl solution
No comments:

Thursday, July 21, 2022

How to remove air bubbles from burette tip

Titration, also known as titrimetry, is a method used to determine the concentration of an unknown solution by comparing it to the concentration of a known solution in the presence of an indicator. Titration is a quantitative as well as volumetric technique. To carry out the titration, you will need different apparatus, such as a pipette, burette, conical flask, volumetric flask, beaker, etc.

Before performing the titration experiment, ensure that the titration apparatus or glassware are properly rinsed with deionized water to remove any sample residue. Before taking the initial reading of the burette, make sure the tip is clean and dry. Once your burette is conditioned and filled without any air bubbles or leakage, take an initial volume reading.

How do you remove air bubbles from the burette tip?

By draining some volume of titrant into a beaker, we eliminate air bubbles that may be present at the tip of the burette as well as the stopcock. If the bubbles persist, you can try forcing the titrant through the burette tip at a higher rate. Then grasp the burette and slightly jerk it down when the stopcock is open.

How does an air bubble affect titration?

If an air bubble is present during the titration, the volume reading may be inaccurate. Throughout the titration, the amount of air released from the tip will be counted along with the amount of titrant that has already left the burette.

This indicates that the volume of solution delivered through the tip will not equal the volume determined by taking the final burette reading and subtracting it from the initial reading.

Why are air bubbles in the burette tip a possible source of error in a titration experiment? How do you remove air bubbles from the burette tip?

Burets measure how much volume of liquid is released through the tip. During the titration, the amount of air released from the tip will be counted along with the volume of the titrant that has already left the burette.

This means that the volume of liquid delivered through the tip will not be the amount calculated by subtracting the final burette reading from the initial burette reading. This cause error in calculations and therefore it is considered a possible source of error in a titration experiment.

The following are different ways to remove air bubbles.
  • When you quickly open the burette valve, the air bubble is often removed from the tip.
  • If you gently tapping the tip of the burette while the titrant is flowing, the air bubble may remove.
  • Use a squeeze bulb on the top of the burette to push the liquid out through the tip while the burette valve is open.

Why do bubbles of air rise up through water?

Bubbles are gases, which have a lower density than liquid water. They get pushed up to the surface because they are less dense and rise up as they are lighter than around them.

What will happen if we don't remove the air bubbles from the nozzle of a burette?

While doing the titration if we do not remove the air bubble from the nozzle of the burette, we will get inaccurate results. The process of titration is the one that is used in the analysis. Because the presence of air bubbles results in causes errors in volume readings.




People also ask:

How do you prevent air bubbles in a burette?
Why should air bubbles be removed from burette tip?
How do you get rid of air bubbles in solution?
Why removal of air bubbles is necessary before titration?
How do you get rid of bubbles in a sample?
Why removal of air bubbles is necessary before titration?
What must be removed from the tip of the burette prior to the start of the titration?
Why must the tip of the burette be filled?
Why do you need to rinse the burette with a base before you completely fill it
No comments:

Wednesday, July 20, 2022

Why does the burette need to be rinsed before titration?

After washing the burette with water, we have to rinse it with titrant so that the results of experiments or titrations are more accurate. It is required to rinse the burette with water after washing because if the burette is used without adequate cleaning and washing, the results of some studies using the burette may be inaccurate and the readings due to the presence of water droplets values may vary.

Titration, or titrimetry, is a quantitative and volumetric method for determining the concentration of an unknown solution using the concentration of a known solution in the presence of an indicator. A burette, pipette, conical flask, volumetric flask, beaker, etc. are required for conducting the titration.

Why is it important to rinse the burette with the titrant before beginning the titration?

It is significant to rinse the burette with distilled water to remove contaminants. In addition, it should be rinsed with a titrant to remove any possible traces of distilled water, to ensure that the solution in the burette is not diluted.

Why do you need to rinse the burette with a base before you completely fill it with NaOH?

The purpose of the burette is to measure the volume precisely. The accuracy of the titration determines its accuracy. The accuracy of a titration is directly proportional to precision.

If the burette had an acidic chemical residue, it would neutralize a portion of the sodium hydroxide solution that you are using to measure. This will lead you to believe that there was more acid in our sample than it actually was.

The rinsing with base ensures that none of your NaOH is unintentionally neutralized by unwanted chemical residue in the burette, which would change the concentration of a prepared solution of NaOH which may give a calculation error.

Why is it important to rinse the burette of an auto titrator before analysis?

If the burette hasn't dried completely before we use it, any trace of water that's still inside will dilute our titrant, resulting in a change in the concentration of the solution.



People also ask
  • Why is the burette rinsed with NaOH?
  • Why is burette rinsed with acid before titration?
  • Why is it important to rinse a burette before titration?
  • Why is the burette rinsed initially with NaOH?
  • Why is the burette rinsed with acid before titration?
  • Why must air bubbles be expelled from the burette tip?
  • Why does rinsing improve the accuracy of the endpoint?
  • Why burette and pipette is rinsed?
  • Why do you rinse a buret with solution?
  • What should you rinse a burette with?
No comments:

Friday, July 15, 2022

What is complexometric titration in chemistry?

Titration, also known as titrimetry and volumetric analysis, is a chemical qualitative analysis technique that is used to determine the unknown concentration of an identified analyte. In the process of titration, an analyte and a titrant are used. To find the endpoint of titration for analysis, a known concentration of titrant is added to an unknown quantity of analyte. 

When the endpoint is reached, the moles of titrant and analyte will be identical. Titration can be divided according to its processes and goals, acid-base titration, complexometric titration, precipitation titration, redox titration, etc.

What is complexometric titration?

Complexometric titration also called chelatometry used to determine the metal ions n a solution. It is a type of volumetric titration wherein the colored complex is used to determine the endpoint of the titration. In this kind of titration, an indicator is used that can cause a clear change in color in the titration, which shows the endpoint of the titration.

In complexometric titrations, a metal-ligand complexation reaction is used. It is based on the formation of a complex between the analyte and the titrant. It is a common method to titrate metal ions in a solution using the chelating agent EDTA.

One example of complexometric titration is the process of determining the hardness of water by titrating it with EDTA while using eriochrome black-T as the indicator. For complexometric titrations in analytical chemistry, EDTA (Ethylenediaminetetraacetic acid) is one of the most often employed chelating agents.

What is the principle of complexometric titration?

The principle behind complexometric titrations is the transformation of a simple ion into a complete ion to determine the endpoint using a metal indicator and the displacement of water from the solvation sphere of the metal ions by ligands.

When EBT binds to metal ions, it turns a wine-red color. Though, when it is not bound to metal ions, it remains blue. While EDTA is colorless regardless of whether it is coupled or not to a metal ion.

What are the indicators used in complexometric titration?

Complexometric indicators are the indicators used in complexometric titrations. When particular metal ions are present, the color of these indicators changes significantly. These are also referred to as metallochromic indicators or PM indicators.

These indicators are water-soluble organic molecules. Some complexometric indicators are Eriochrome Black T, calcein, fast sulphon black, hematoxylin, Curcumin, etc.

Examples of indicators that turn pink when calcium or magnesium is present are Calmagite and Eriochrome Black-T. A complexometric EDTA titration using either Calmagite or EBT as the indicator reaches its endpoint when the color changes from pink to blue.

What is the classification of complexometric titration?

Ethylene diamine tetra acetic acid (EDTA) can be used as a chelating titrant in several ways. Consequently, EDTA titrations can be performed in a variety of ways, as follows.

Direct titration:

Direct titration is the most practical and easy method of EDTA isometric titration. It is similar to the acid-base titration technique. To provide a sample with metals, the EDTA solution is added to the titration standard. This sample is then titrated until the endpoint is reached. Direct complexometric titration can be used to identify a variety of metals including zinc, copper, aluminum, barium, lead, mercury, bismuth, chromium, etc.

Back titration:

Because we are titrating for the excess amount of EDTA, this is known as back titration. An excess of EDTA standard solution is added to the metal solution. The excess EDTA is then back titrated with the solution of the second metal ion.

Replacement titration:

Substitution titration is used when direct titration or back titration fails to produce sharp endpoints. The metal–EDTA complex receives this analyte; the metal present in the analyte displaces another metal from the metal-EDTA complex.

Indirect titration:

Certain anions react with metal cations to form a precipitate. EDTA does not affect these anions. Consequently, indirect titration with EDTA can be employed to analyze these substances. Indirect titration can be used to determine barium ions.


Key terms used in complexometric titrations:

  • Burette: A graduated glass tube having a tap at one end is used for titration to administer known volumes of liquid.
  • Analyte: A substance whose quantity/concentration is to be determined.
  • Titrant: A solution with a known concentration is filled in the burette that is added to another solution to find out the concentration of a second chemical species.
  • Buffer: A solution consisting of an acid and its conjugate base is used to control the pH of a solution.
  • pH: A measure of the hydrogen ion concentration is equal to - log [H+].
  • Complex: a substance composed of two or more components capable of independent existence.
  • Metal chelate: a species that is simultaneously bound to two or more sites on a ligand.
  • Complexing agent or ligand: molecules and/or anions with one or more donor atoms that each donate a lone pair of electrons to the metal ion to form a covalent bond.
  • Chelation: the process involved in the formation of a chelate.
  • Chelating agents: organic molecules containing two or more donor groups that combine with metal to form a complex are having a ring structure.


Frequently Asked Question (FAQ):


What are the methods of endpoint detection in complexometric titration?

In a complexometric titration, there are two ways to identify the endpoint: visual technique and instrumental techniques.

Why eriochrome black t is used in complexometric titration?

In complexometric titrations, the eriochrome black T is used as an indicator because it forms a colored complex in its protonated form with calcium, magnesium, or other metal ions. In the process, its color shifts from blue to pink and red.

What is the role of buffer solution is used in EDTA titration?

All reactions between metal ions and EDTA are pH-dependent, so a buffer solution is used because it is resistant to pH changes. Ammonium chloride and ammonia buffer (NH4Cl + NH4OH buffer) buffer solution of pH 10 is used in EDTA titration to determine the hardness of the water.



People also ask:

Complexometric titration example
Complexometric titration pdf
Complexometric titration principle
Complexometric titration with edta
Complexometric titration indicator
Complexometric titration classification
Complexometric titration calculations
Complexometric titration experiment
Complexometric titration curve
Complexometric titration lab report
Complexometric titration slideshare
No comments:

Saturday, July 9, 2022

What is acid base titration in chemistry?

Titration is also known as titrimetry is a quantitative and volumetric method for determining the concentration of an unknown solution using the concentration of a known solution in the presence of an indicator.

To determine the concentration of an analyte in a solution, it is necessary to slowly add a volume of titrant (typically with a burette) until the color of the indicator changes to indicate a chemical reaction.

In quantitative chemical analysis, there are four types of titrations in terms of their purposes and methods, such as acid-base titration, redox titrations, precipitation titrations, and complexometric titrations.

What is acid-base titration?

As you know, there are a lot of different compounds, both organic and inorganic. With the help of titration, you can determine their acidic or basic properties.

An acid-base titration is a quantitative analysis technique for determining the concentration of an acid or base by neutralizing it with a standard solution of acid or base of known concentration (Molarity).

Acid-base titrations involve neutralizing acids and a base therefore is also known as neutralization titration. It depends on the analyte's chemical interaction with a standard reagent.

Three different theories have been proposed to characterize acids and bases Arrhenius theory, Bronsted-Lowry theory, and the Lewis theory of acids and bases.

What is the principle of acid-base titration?

The acid-base titration principle is based on the neutralizing reaction that occurs between acid and base.
ACID + BASE ⇒ SALT + WATER

Strong/ weak acids or bases are used in acid-base titrations. It is used to determine how much acid or base there is. It is also used to determine the strength of an unknown acid or base. It determines the pKa of an unknown acid or pKb of an unknown base. 

Not every reaction can be called a titration. Consequently, a reaction can be considered a titration under certain conditions. 

The conditions are listed below:
  • The reaction must quickly.
  • A stoichiometric reaction should take place.
  • The change in free energy during the reaction must be sufficiently large.
  • There should be a method to determine the completion of the result.

What is an example of acid-base titration?

One example of an acid-base titration is the standardization of a NaOH solution usingCH3COOH, where sodium hydroxide is used as the strong base and is added to the burette, and acetic acid is used as the weak acid and is added to the conical flask. Acetic acid dissociation rises when a strong base is introduced to a weak acid.

What is the classification of acid-base titration?

Acid-base titrations are classified into four categories such as strong acid and strong base, weak acid and a strong base, weak base and strong acid, and weak acid and weak base.

Strong acid-strong base titration:
Example: Titration of hydrochloric acid (HCl) which is a strong acid and sodium hydroxide (NaOH) which is a strong base.

Weak acid and a strong base titration:
Example: Titration of acetic acid (CH3COOH) which is a weak acid and sodium hydroxide (NaOH) which is a strong base.

Weak base and strong acid:
Example: Titration of ammonia (NH3) which is a weak base and hydrochloric acid (HCl) which is a strong acid.

Weak acid and weak base:
Example: Weak acid includes formic Acid (HCOOH), Acetic Acid (CH3OOH), etc, and the weak base includes Ammonium Hydroxide (NH4OH), Ammonia (NH3)

What are indicators in acid base titration?

Acid-base indicators are weak acid or weak base that changes color as the concentration of hydrogen (H+) or hydroxide (OH-) ions in an aqueous solution changes. However, unlike other acids, the acid and base form the indicator have unique colors.

Indicators are often used in applications that require pH changes, such as titrations, pH tests, and science presentations because the color of the indicator depends on the pH of the solution.

The pH range of an indicator, which is dependent on the acid strength of the indicator, is its most important characteristic. The range of pH values over which an indicator changes color from its acid form to its base form is known as the indicator's pH range.

It extends from the highest pH, where only the acid form is visible, to the lowest pH, where only the basic form is visible. The indicator is insensitive to pH changes outside its range because it does not change color at these pH values.

Phenolphthalein and methyl orange are the two most common indicators used in the acid-base titration. Litmus is probably the best-known pH indicator. Common acid-base indicators include methyl red, thymol blue, bromocresol green, phenol red, etc.

What is the equivalence point in an acid-base titration?

The equivalence point is the point in a titration where the amount of titrant added is just enough to make the analyte solution completely neutral. In an acid-base titration, the equivalence point, moles of base = moles of acid, and the solution only contains salt and water. The endpoint of a reaction is the moment at which the reaction is completed.

It is essential to remember that endpoints and equivalence points may not be the same. As the equivalence point is determined by the stoichiometry of the reaction, whereas the endpoint is just the change in color of the indicator. 

Usually, the endpoint can be determined only after the addition of a slight excess amount of the titrant. If the endpoint is different from the equivalence point, then it amounts to an error in the experiment.


Key terms used in acid-base titrations:

  • Burette
A graduated glass tube having a tap at one end is used for titration to administer known volumes of liquid.
  • Analyte
A substance whose quantity/concentration is to be determined.
  • Titrant
A solution with a known concentration is filled in the burette that is added to another solution to find out the concentration of a second chemical species.
  • Buffer
A solution consisting of an acid and its conjugate base is used to control the pH of a solution.
  • pH
A measure of the hydrogen ion concentration is equal to - log [H+].
  • pKa
The pKa value describes the acidity of a certain molecule. The strength of an acid is determined by how tightly a proton is retained by a Bronsted acid.


Frequently Asked Questions (FAQ):


What is the titration curve in chemistry?

The plot of the pH of the analyte solution vs the volume of titrant applied added as the titration progresses.

Why is acid-base titration important?

The main purpose of a strong acid-strong base titration is to determine the concentration of an acid solution by titrating it with a solution of known concentration, or vice versa until neutralization occurs. Therefore, the reaction between a strong acid base and a strong base will produce water and salt.

What are the steps of acid-base titration?

The steps of acid-base titration are: selection of titrant and the titrate, selection of normality of titrate, select the amount of liquid you wish to pipette, selection of indicator, note the endpoint when solution changes color, and calculate the normality of the titrant using the final reading.

Which indicator is used in acid-base titration?

Common acid-base indicators include methyl red, thymol blue, bromocresol green, phenol red, etc. Phenolphthalein and methyl orange are the two most common indicators used in the acid-base titration. 

Litmus is probably the best-known pH indicator. Phenolphthalein is chosen because of its pH-dependent color change between 8.3 and 10. It shows pink in basic solutions and colorless in acidic ones.

Why is NaOH used in titration?

In a titration, sodium hydroxide is used if the unknown sample solution is acidic, as bases are utilized to neutralize acids.


People also ask

What are acid-base titration and its classification?
Acid-base titration pdf
Acid-base titration slideshare
Acid-base titration assignment
Acid-base titration calculations
Acid-base titration curve
Acid-base titration experiment report


References:
  • Wikipedia contributors. "Acid–base titration." Wikipedia, The Free Encyclopedia. Wikipedia, The Free Encyclopedia, 7 May. 2022.
  • GH Jeffery, J Bassett, J Mendham, RD Denney, Vogel's Textbook of Quantitative Chemical Analysis, 5th ed, 1989, Wiley, NY.


No comments:

Thursday, July 7, 2022

What is redox titration in chemistry?

Titration (also known as titrimetry and volumetric analysis) is the most common quantitative and volumetric lab technique for determining the unknown concentration of an analyte by comparing it with the known concentration of a solution in the presence of an indicator.

Depending on the goals and process, there are different types of titrations, such as acid-base titrations, redox titrations, complexometric titrations, and precipitation titrations.

What is redox titration?

Redox titration is a method used in the laboratory to find out the concentration of the analyte by carrying out a redox reaction between the analyte and the titrant.

This titrimetric method is mostly based on the change in oxidation number or the transfer of electrons between the reactants. This means that these reactions are mostly based on oxidation-reduction reactions.

In the oxidation-reduction titration, a reducing substance is titrated with a standard solution of an oxidizing agent (For example - ceric ammonium sulphate (NH4)4Ce (SO4)4), or an oxidizing substance is titrated with the standard solution of the reducing agent(e.g., titanous chloride- TiCl3).

For redox titration evaluation, it is significant to obtain the shape of the titration curve that corresponds. In redox titration, it is much easier to monitor the concentration of the reaction potential rather than the concentration of the reacting species.

What is the principle of redox titration?

The principle behind the oxidation-reduction (Redox) titration is that during the oxidation process, electrons are lost, whereas, during the reduction process, electrons are gained.

Oxidant + ne ↔ Reductant

redox titration

How will we be able to detect the oxidation of a substance?

The substance has experienced oxidation if even one of the scenarios listed below occurs.

If hydrogen is removed from the given substance, if the substance loses electrons, if the oxidation state exhibited by the substance increases, and if oxygen is added to the substance.

How will we be able to detect the reduction of a substance?

If even one of the possibilities listed below is true, we can conclude that the substance has undergone reduction. 

If hydrogen is added to the substance, if the oxidation state exhibited by the substance decreases, if the substance gains electrons and if oxygen is removed from the given substance.

So, you can conclude that there is a transfer of electrons between the analyte and the titrant during redox titrations.

What is the example of redox titration?

An example of redox titration is when an iodine (I2 )solution is treated with a reducing agent such as thiosulfate (Na2S2O3 ) to produce iodide using a starch indicator to detect the endpoint, also referred to as iodometric titration. Another example is the titration of potassium permanganate with oxalic acid.

What are the types of redox titration?

Depending on the titrant used, there are several forms of redox titrations, such as iodometry which uses iodine, dichrometry which uses potassium dichromate, cerimetry which uses cerium(IV) salts, permanganometry which uses potassium permanganate, and bromatometry which uses a bromine (Br2) titrant, etc., and depending on the method, direct titrations, and back titration.


Frequently Asked Question (FAQ):


What is redox titration used for?

Redox titrations are used to determine the concentration of an unknown substance in a solution. The equivalence point is found when the titrant and analyte have reacted stoichiometrically by transferring electrons.

Which indicator is used in redox titration?

A redox indicator is an indicator that changes color change at a specific electrode potential. There are two common classes of redox indicators used in the redox reaction: pH independent (e.g. Diphenylamine, Nitrophenanthroline) and pH dependent (e.g. Methylene blue, Indigo carmine)

What is the role of phosphoric acid in redox titration?

Phosphoric acid is added to reduce the electrode potential for the Fe3+ → Fe2+ by stabilizing the ferric ion. This ensures that the ferric product, Fe3+, remains in its colorless form.

Which is the factor that affects redox titration?

pH is the only factor that influences redox titration. Potassium permanganate (KMnO4) is a good example because it has the maximum oxidizing effect in an acidic condition and the lowest in an alkaline medium.

What are self-indicators?

A self-indicator is a chemical molecule that, in addition to self-participating in the reaction, can also serve as an indicator when the analyte and titrant have finished reacting (Endpoint/equivalence point). An example of a self-indicator is KMnO4.

What is a back titration in chemistry?

A back titration is a technique for estimating the concentration of an analyte by reacting it with an excess of a known reagent. The remaining excess reagent is then titrated with another, second reagent.


Key terms used in redox titrations:

  • Redox titration/oxidation-reduction titration:
A kind of titration in which the analyte and titrant undergo a redox reaction
  • Burette:
A graduated glass tube having a tap at one end is used for titration to administer known volumes of liquid.
  • Analyte:
A substance whose quantity/concentration is to be determined.
  • Titrant:
A solution with a known concentration is filled in the burette that is added to another solution to find out the concentration of a second chemical species.
  • Oxidation:
Oxidation is a chemical process that happens when an atom, molecule, or ion loses one or more electrons. Oxidation increases the oxidation state of a chemical species.
  • Reduction:
A chemical reaction between two substances in which one of the atoms in the reaction gains an electron.
  • Reducing agent:
A reactant gets oxidized to produce electrons in the reaction.
  • Oxidizing agent:
A reactant that undergoes a reduction reaction to gain electrons.


People also ask
  • Redox titration pdf
  • Redox titration experiment
  • Types of redox titration
  • Redox titration questions and answers pdf
  • Redox titration with potassium permanganate lab report
  • Titrant used in redox titration
  • Redox titration ppt
  • How to do a redox titration
  • Redox titration lab answers
  • Acid base and redox titration

References:
  • GH Jeffery, J Bassett, J Mendham, RD Denney, Vogel's Textbook of Quantitative Chemical Analysis, 5th ed, 1989, Wiley, NY.
  • Wikipedia contributors. "Redox titration." Wikipedia, The Free Encyclopedia. Wikipedia, The Free Encyclopedia, 4 Feb. 2022. 
No comments: